Ordered this to replace a fan motor that had burned out in our bathroom vent. The product was a perfect fit. It is quieter than the original!
The old motor was getting noisy and needed replacing. Fast shipping.
I can verify the other reviews stating this works to replace the exhaust fan motor in a Broan 665N bathroom exhaust fan. Had to reverse the mounting screws; to do this first remove the 2 long screws. You then have to remove the round metal castings on the front and back of the motor and reinstall them on the opposite side. Then install the screws. I re-used the original plastic squirrel cage fan after washing out the accumulated dust. I also treated the rusting housing where the fan goes with Rust Reformer.
Great fan motor-its quiet- it was easily modified to replace a bad motor in a 665N bathroom light/fan/heater. It saved me having to retrofit a new unit in the existing opening. The price was great and shipping was prompt. I am so happy to have found McCombs Supply. I was up and running 20 minutes after opening the package
The replacement fan motor was suggested for my vent. As others have mentioned, the mounting bolts had to be reversed -- a very simple task. In my case, the new motor shaft was larger in diameter than the old one so I had to drill out the impeller hub to be able to press it onto the new shaft. Having a drill press helped assure that the drilled hole was straight so the impeller did not wobble. Still no big deal. The fan now works again and at a very reasonable price with prompt shipping.
Exactly the fan needed after a very long search. Great buy and superior service.
Not knowing the old motor specifications, serial number, I was able to match the replacement motor by the web site specifications, measurement, and picture. Perfect replacement motor, just fit right. Excellent service, shipped fast, got it in 3 days.
Very easy, flipped the bearing, tested ok.Installation took 5 min. Hope to get another 20 years out of this motor.
Received this item in only a few days after ordering, fit my fan house with only having to change the side the long bolts come out of it as other have mentioned.
Have a NuTone / Broan 668N with worn out motor bushings. To get this one to work, all that needed to be done was swap the bearing mounts and bolts with each other on the new motor. Took under 5 minutes. Make sure you tighten the bolts incrementally and evenly, as not doing so can bind the rotor shaft or make it noisy. I found it easiest to plug it in and run the motor without the impeller from the old assembly AS I tightened the bolts, so I could observe any binding or noise. YMMV
We have two Nutone 9425F Bulb Heater fans and the vent motor went out on both after 30+ years. These replacements are the perfect match and we received them in days. Could have replaced the fans for many $$$ and hours of work, but for less than $20 they a humming like new!
Finally after 30 years, bathroom exhaust fan motor failed. Couldn't go without exhaust fan but replacing complete unit would have led to extensive work and cost in a space that will undergo a complete remodel in about 2 years. Stumbled across this motor at McCombs and it was the perfect solution. Web order process easy, communication re processing and shipping of my order was great, and product was the exact one I needed.
McCombs had just the part I needed to replace an exhaust fan in my older home. The web site made it easy to find the part and it arrived earlier than expected.
The person on the phone was courteous and helpful I received fast service.
Thank you,
Clovis Joseph
I used this motor to replace the vent fan in a Nutone 665N heat/vent/light unit. Original motor was from Jakel. The Packard 65106 worked fine - I just had to turn the bolts around as advertised. Price was great - much cheaper than the CTS C53709 53709-000 J238-062-6146 motor advertised on Amazon.
The motor was exactly what I needed. The shipment arrived much faster than expected.
