Product Description
The Dundas Jafine ProClean Dryer Duct Lint Trap number PCLT4WZW acts as a secondary lint trap for your electric clothes dryer and is not intended for use with gas clothes dryers. It installs easily onto your dryer transition duct and collects additional lint that is not captured by the standard dryer lint trap.
This product helps to eliminate excess lint within the duct, reducing the risk of dryer fire occurring and allowing the air to pass more easily through the duct, saving energy as the dryer runs more efficiently and in turn helping to reduce your home energy costs.
The clear door gives an unobstructed view of the lint screen which should be removed and clean after each load of laundry.
Installation Instructions:
1. CUTTING THE EXISTING DUCT
-- Cut the existing duct attached to the dryer about 10 in. above the top control panel of the dryer.
2. ATTACHING THE DUCT TO THE TOP OF UNIT
-- Slide the free end of the duct which leads outside, over the top collar of the lint trap unit. Secure it with one
of the metal clamps provided.
3. ATTACHING THE DUCT TO THE BOTTOM OF UNIT
-- Slide the free end of the remaining duct coming from the dryer, over the bottom collar of the lint trap unit. Secure it with the other clamp.
4. INSTALLING THE UNIT TO THE WALL
-- Locate a stud behind the wall or mount directly to the wall using drywall plugs and screws (not provided).
5. CLEANING THE LINT SCREEN AFTER EACH USE
-- Open the door of the lint trap unit, remove the screen and clean off the lint.
