Nu-Calgon 4371-75 Tri Power HD Foaming A/C Coil Cleaner 19 Oz Aerosal

Nu-Calgon Tri Pow'r HD. ExpandingFoam Coil Cleaning number 4371-75.

For Evaporators and Condensers.

19 Ounce Aerosal Can

Benefits:

• For Cleaning Air Cooled Condensers, Evaporator Coils, Permanent Filters, Fan Blades and more.
• Use as a Detergency, Degreaser, Deodorizer.
• Safe for Microchannel Coils
• Metal Safe
• Pleasantly Scented

Description:

Tri-Powr HD aerosol provides a powerful foaming spray to assist in lifting debris off of coils. Its a detergent, degreaser and deodorizer  all in one convenient spray. Suitable for any coil design, including microchannel. 

The ideal environmentally friendly and biodegradable cleaner thats perfect for cleaning air-cooled condensers, evaporator coils, permanent filters, fan blades, motors and other general cleaning needs. Tri-Powr HD is a heavy duty alkaline cleaner that is very unique when compared to other similar alkaline coil cleaners. Its based upon positive emulsion technology which is the most effective technology used for removing grease and grime. Tri-Powr HD emulsifies or converts greasy deposits into a fluid or liquid form that can be easily flushed. It also contains a surfactant for wetting the greasy deposits as well as corrosion inhibitors for protecting equipment surfaces. Its non-acid, non-toxic, biodegradable and very safe to use and its a deodorizer as well.

Directions

This product must be used in accordance to the following directions by HVACR professionals only.

1. Turn off or disconnect power to unit being serviced.
2. Remove any heavy or matted soils that can be easily dislodged by hand.
3. Do not spray into electrical components.
4. Shake well before using. Remove cap and point toward surface to be cleaned.

Condensers:

Inject cleaner onto the coil. Expanding foam will penetrate throughout the coil. Wait a few minutes for foam to liquefy and remove grease and grime within coil. Rinse with water. For stubborn or heavy deposits, repeat applications may be necessary.

Evaporators:

Apply, wait 5-10 minutes and rinse with water spray bottle or immediately resume system operation and allow condensate generated to promptly self rinse coil.