Product Description
A/C Leak Freeze R, 0.5 Ounce Stop Leak For Appliance Refrigeration System Part Number 00279
Features:
- Will stop leaks of refrigerant gas in appliance and refrigeration systems
- Made in the USA
- A/C Leak Freeze is compatible and can be mixed with refrigerant gas: R11, R12, R13, R14, R22, R23, R123, R124, R134a, R141b, R404a, R407c, R410a, R502, R503, R507, R600
- Permanently seals leaks in Appliance refrigeration systems
- Will continue to seal additional leaks for up to 1 year that meet testing specifications
- Does not contain polymers
- Not activated by moisture or oxygen
- Tested to be non-clogging to a/c compressor and recovery unit
- Ideal for preventive maintenance and leak protection
- Suitable for use in all copper or aluminum coils
- AC Leak Freeze will repair leaks measuring one-half millimeter (0.5mm) and smaller
Dose and Application Instructions:
- Applications: Appliances and Refrigeration Systems
- System Size: 4-16 ounces
A/C Leak Freeze instructions for use:
1. Turn the unit on, the compressor and unit must be operating at full power
2. Unscrew the cartridge cap and connect the adapter to the cartridge
3. Connect the special adapter (do not overtighten) and push out the air contained in the transparent hose while the system continues to run
4. Choose application option:
A. Low Pressure (40PSI and under): simply push AC Leak Freeze in with the syringe plunger
B. Med-High Pressure (80PSI and under): place the syringe in a standard caulk fun and slowly
ratchet AC Leak Freeze into the system
C. High Pressure (above 80PSI): pump down or isolate the high side of the system to reduce
pressure on the low side or service port of the system and use method A or B
5. Connect the adapter to the low-pressure port of the AC system and inject contents
6. Disconnect the cartridge from the AC system or refrigerant system
7. If necessary, charge the system
8. Allow at least, 30 minutes for the repair to take place with the system running
