Product Description
Aerosol Coil Cleaner for Condensers and Evaporators
Features and Benefits:
- 2 in 1 condenser and evaporator coil cleaner and degreaser
- Viper is non-rinsing on evaporator coils, free of hazardous chemicals, toxic fumes, and won't burn your skin
- Used to clean small indoor kitchen equipment, condenser, and evaporator coils
- The aerosol injector produces a pin spray of expanding foam that penetrates deep in between the coil fins
- Foam will liquefy after a few minutes removing heavily imbedded grease and grime
- Viper is OEM approved for Aluminum and Microchannel coils, friendly on all plastics and rubber
- Use viper to cut grease off coil fins, grills, exhaust hoods, washable filters, and any other oily surface
Directions:
- Turn off or disconnect all power from system
- Inject foam starting at the bottom of the coil and fully saturate
- Wait 5-10 minutes to allow foam to liquefy and loosen dirt, grease, and grime
- Condenser coils: light rinse if water is available Evaporator Coils: No rinse required
- In food processing areas: remove or protect all food and packaging materials. Rinse with potable water after use if contact with food or packaging material is expected
- All done!
