Product Description
A/C Leak Freeze, 1.5 Ounce Refill
Hose Not Included
Features:
- Will stop leaks of refrigerant gas in air conditioning and refrigeration systems
- Made in the USA and OEM approved
- AC Leak Freeze is compatible with all refrigerants and oils except ammonia
- Permanently seals leaks in air conditioning and refrigeration systems
- Does not contain Polymers
- Not activated by moisture or oxygen
- Tested to be non-clogging to AC compressors and recovery units
- Ideal for preventive maintenance and leak protection
- Suitable for us in all heat pumps
Dose and Application Instructions:
- Applications: AC and Refrigeration Systems (Tons: 1-6 1.5 ounces; Tons: 6-12 2 ounces)
AC Leak Freeze instructions for use:
1. Turn the unit on, the compressor and unit must be operating at full power
2. Unscrew the cartridge cap and connect the adapter to the cartridge
3. Connect the special adapter (do not overtighten) and push out the air contained in the transparent hose while the system continues to run
4. Choose application option:
A. Low Pressure (approx. 40PSI and under): simply push AC Leak Freeze in with the syringe
plunger
B. Med-High Pressure (approx. 80PSI and under): place the syringe in a standard caulk gun
and slowly ratchet AC Leak Freeze into the system
C. High Pressure (above 80PSI): pump down or isolate the high side of the system to reduce
pressure on the low side of the system and use method A or B
5. Connect the adapter to the low-pressure port of the AC system and inject contents
6. Disconnect the cartridge from the AC system
7. If necessary, charge the system
8. Allow at least 30 minutes for the repair to take place with the system running
