Product Description
Nu-Calgon Part Number 4320-W8
Phase III Acid Test Kit
The concentrate of acid in refrigeration oil is expressed as an acid number in mg of KOH per gram of oil (milligrams of potassium hydroxide per gram of oil). The acid number is a measure of the amount of hydroxide solution needed to neutralize the acid in oil. The more acid there is in the oil, the more potassium hydroxide
In the Phase III test, an acid number of 0.05 mg KOH per gram of oil has been set as the maximum acceptable acid concentration in mineral oil and alkylbenzene oil. In polyol esters, the number is generally accepted as 0.16 mg. Mineral and alkylbenzene oils with an acid number less than 0.05 mg or POE’s with an acid number less than 0.16 mg are acceptable and will cause no change in the color of the test kit’s acid indicator. However, if the respective oils have an acid number greater than these limits, it will cause the acid indicator to change from purple to pink or clear indicating that the oil is contaminated.
Features and Benefits:
- Quickly test for acid contamination in system oil on site
- Tests acid in mineral, polyol ester, alkylbenzene, PVE, and PAG oil
- Most accurate on site acid test
- Quick test that only takes about a minute
- A2L Ready