9460 Acme Miami Dryer Booster- Jet for dryers with a long-run exhaust duct

Acme-Miami Dryer Jet Model 9460.

Model 9460. No on-site wiring. The 9460 turns on and off when the dryer turns on and off . . . automatically. Adjustable Air Pressure Sensing Switch (PS-35) is mounted on fan and pre-wired at factory with 10 foot line cord. Includes probe. Just Plug it in!

For Clothes Dryers with a long-run exhaust duct. Long run duct increases drying time power consumption, plus wear and tear on the dryer. With lint build-up and obstructions in long run ducts the risk of dryer fire increases.

Ball bearing Motor OUT of Air Stream. No lint on Motor and no place for the lint to collect.
Install right next to dryer or anywhere in the line. No Lint Trap Needed if installing next to the dryer! No Lint Trap means no automatic lint build-up.
All DryerJet models have Rubber Feet installed to stand on the floor or a shelf. Can also mount horizontally.
The DryerJet tested excellently on runs over 100 effective feet* tested to proposed UL 705 Supplement for Dryer Boosters and Army Corps of Engineers Technical Letter #1110-3-483 that requires maintaining air velocity of 1200 Feet Per Minute (FPM). Produces 120 Cubic Feet per minute (CFM) Motor draws 1 amp.
* Effective feet computation: Each foot of straight pipe = 1 foot. Each 90 bend = 5 feet. Each 45 bend = 2.5 feet.